Whether you’re a casual cruiser, competitive skater, or longboard enthusiast, skateboard bearings are at the heart of every smooth ride. When shopping for bearings, you’ll likely encounter the term ABEC rating—but what does it really mean? Is a higher ABEC always better? What about ISO standards, or the popular 608 bearing used in skateboards? And how do you choose the right bearing material?
At BYWB Bearing, we’re not just bearing suppliers—we’re performance partners. In this guide, we break down what ABEC ratings mean, compare them with ISO standards, explain the 608 designation, and help you choose the right material for your style of skating.
What Is the ABEC Rating?

The ABEC rating is a system developed by the Annular Bearing Engineering Committee (ABEC), a part of the American Bearing Manufacturers Association (ABMA). It is primarily used to measure the dimensional tolerances and precision of ball bearings. The ABEC scale includes odd numbers from ABEC-1 to ABEC-9, with higher numbers representing tighter tolerances.
ABEC Ratings Overview
| ABEC Rating | Precision | Common Use | Notes |
| ABEC-1 | Lowest | Basic, entry-level | Cost-effective but looser tolerances |
| ABEC-3 | Low | Budget skate bearings | Slightly better than ABEC-1 |
| ABEC-5 | Moderate | Standard for most skateboards | Good mix of performance and durability |
| ABEC-7 | High | Premium performance | Smoother and quieter |
| ABEC-9 | Very High | High-speed longboarding | Overkill for most skaters |
However, the ABEC rating does not measure durability, material quality, or real-world skating performance. That’s a crucial point. An ABEC-7 bearing made from poor materials won’t perform better than a well-built ABEC-5.
ABEC vs ISO Tolerance Standards

While the ABEC system is common in the U.S., other countries often use the ISO 492 standard, which defines tolerances for radial bearings worldwide.
Key Differences Between ABEC and ISO:
ISO has 5 primary tolerance classes: P0, P6, P5, P4, and P2 (P2 is the most precise).
ABEC has 5 main classes: ABEC-1, ABEC-3, ABEC-5, ABEC-7, and ABEC-9.
Both systems are similar, but ISO includes tolerances for more aspects (bore, outside diameter, width, runout, etc.).
P0 ≈ ABEC-1, P6 ≈ ABEC-3, P5 ≈ ABEC-5, P4 ≈ ABEC-7, P2 ≈ ABEC-9
| ISO Class | ABEC Equivalent | Use Case |
| P0 | ABEC-1 | Basic tolerance |
| P6 | ABEC-3 | General usage |
| P5 | ABEC-5 | Most skateboards |
| P4 | ABEC-7 | Precision bearings |
| P2 | ABEC-9 | High-speed, low-friction settings |
The ISO standard is more comprehensive, and some international bearing manufacturers may label their bearings using ISO instead of ABEC.
What Is a 608 Bearing?

When you shop for skateboard bearings, you’ll often see the term “608 bearing.” This refers to the size and structure, not the precision.
608 Bearing Specifications:
Inner diameter (bore): 8 mm
Outer diameter: 22 mm
Width: 7 mm
Standardized across most skateboards, inline skates, scooters, and rollerblades
The 608ZZ and 608RS versions denote shielding:
608ZZ: Double metal shielded (Z = metal shield)
608RS: Single or double rubber seal (R = rubber seal)
This bearing type is the industry standard for skateboarding due to its size, load capacity, and compatibility with wheels and trucks. At BYWB Bearing, we offer 608 bearings in multiple ABEC ratings and material options, tailored for skating needs.
Why ABEC Doesn’t Tell the Whole Story for Skateboarding
The ABEC rating is only part of the equation. Here’s what ABEC doesn’t measure—but skaters care about:
1. Material Quality
A bearing made with cheap steel will wear out faster, no matter the ABEC rating. High-carbon chromium steel or stainless steel offers better durability.
2. Seal/Shields
Metal shields (ZZ) protect against dust but aren’t waterproof.
Rubber seals (RS/2RS) offer better moisture protection—ideal for street skating.
3. Lubrication
Grease-lubricated bearings offer durability, while oil-lubricated ones roll faster but require more maintenance.
4. Impact Resistance
Street skating, ollies, and big drops subject bearings to shock loads—ABEC doesn’t measure this.
5. Contamination Resistance
ABEC ratings ignore how well a bearing holds up against water, dirt, or grime.
Bones Bearings (a respected skate brand) famously stated:
“ABEC ratings do not determine performance in skateboarding. Real-world skating involves impact, dirt, and vibration that go beyond lab conditions.”
How to Choose the Right Bearing Material for Skateboarding
Choosing the right material is as important as choosing the right ABEC rating. Here’s a breakdown:
1. Chrome Steel (Carbon Chromium Steel)
Most common material in skate bearings
Affordable and durable
Good balance between speed and strength
Best for general skateboarding and park/street
2. Stainless Steel
Corrosion-resistant
Ideal for humid/wet environments (e.g., coastal cities or rain skating)
Slightly softer than chrome steel
Longer lifespan in poor conditions
3. Ceramic Bearings (Full Ceramic or Hybrid)
High-speed capability
Minimal friction and heat generation
Hybrid ceramics: Ceramic balls + steel races
Full ceramic: Balls and races both ceramic
Excellent for longboarding or racing
Expensive and brittle—avoid for hard street impact
4. Titanium Bearings
Lightweight and strong
Rust-resistant
Rare and pricey
Better suited for professional longboarding than casual use
BYWB Recommendation:
Park/Street Skating: Chrome steel, ABEC-5 to ABEC-7, rubber seals
Longboarding/Downhill: Hybrid ceramic, ABEC-7+, light lube
All-weather/cruiser: Stainless steel, ABEC-5, sealed
How to Choose the Right Bearing for Your Skateboard
Choosing the right bearing involves more than numbers. Consider these factors:
A. Your Skating Style
| Style | Recommended Material | ABEC Rating |
| Street Skating | Chrome Steel | ABEC-5 to ABEC-7 |
| Park Skating | Chrome/Steel | ABEC-5 |
| Cruiser Board | Stainless/Chrome | ABEC-5 |
| Downhill/Speed | Hybrid Ceramic | ABEC-7+ |
| All-weather Skating | Stainless Steel | ABEC-5 |
B. Maintenance Level
Low maintenance: Go for sealed bearings (RS/2RS) with grease lubrication.
High performance: Open or lightly shielded with oil; needs cleaning and re-lubing.
C. Budget
Ceramic and titanium bearings cost more but last longer. BYWB offers a wide range of affordable yet high-quality options to suit every skater.
BYWB 608 Skate Bearings: Built for the Streets and the Speed
At BYWB Bearing, we manufacture premium 608 skate bearings that balance precision, durability, and affordability. Our bearings are rigorously tested for:
Noise levels
Impact durability
Rollout performance
Dust/moisture resistance
Whether you’re looking for chrome steel ABEC-5 for daily rides or hybrid ceramics for race day, we’ve got you covered.
We also customize bearings for OEM skateboard brands, distributors, and retailers worldwide.
FAQs About ABEC Ratings and Skate Bearings
Q1: Can I use ABEC-9 bearings on a beginner board?
Yes, but it’s often unnecessary. You likely won’t notice the speed benefit, and the cost might not be justified.
Q2: What’s the most popular bearing for skateboards?
The 608 bearing in ABEC-5 or ABEC-7 chrome steel is the most commonly used across the world.
Q3: Are ceramic bearings worth it?
For downhill, race, or long-distance riding—yes. For street skating, probably not unless you’re an advanced rider.
Q4: How often should I clean my skateboard bearings?
Every few weeks if you skate daily, especially in wet or dirty environments. Use bearing cleaner and re-lubricate.
Final Thoughts
While ABEC ratings give you a glimpse into bearing precision, they’re not the be-all and end-all for skateboarding. Real-world skating demands more: strong materials, proper lubrication, effective shielding, and impact resistance.
At BYWB Bearing, we understand that. That’s why we engineer our 608 skateboard bearings not just for lab specs—but for real riders, real terrain, and real performance.